Location
Home / Digital Print Media / Digital Print Vinyl / High Tack Digital Print Vinyl

High Tack Digital Print Vinyl

High Tack Digital Print Vinyl
High Tack Digital Print Vinyl
High Tack Digital Print Vinyl

We offer a wide range of digital print vinyl with a higher tack level designed for use on surfaces where a standard level of adhesion is just not enough.

This range is made up of both monomeric and polymeric grades so be sure to check our clear descriptions to make sure you have the right product for the job.

Typical applications for the digital print vinyl in this category are:

  • Wall graphics onto brick, block and rendered surfaces.
  • Floor graphics onto concrete and tarmac surfaces.
  • Advertising, stickers and logos onto apolar plastic surfaces such as Moto X, quad bike and jet ski fairings.

  • Can also be used for stickers to go on to wood, galvanised steel and other hard to stick to surfaces.

Specially formulated to give the best possible results using these inks
(each material shows the following icons where applicable)

Eco-Sol InkEco-solvent    Sol InkSolvent    LatexLatex    UV InkUV
ASLAN DFP46 Wrap The Street

ASLAN DFP46 Outdoor floor graphics vinyl for temporary advertising or marking on outdoor surfaces. Removable after use. Slip resistant when used with ASLAN MP 326 (slip resistance safety class R9) or ASLAN MP300 (slip resistance safety class R12). ASLAN DFP46 is Fire Rated to Euroclass DIN EN 13501-1:2018 with classification Bfl-s1 when printed and laminated with MP326 or MP300. Available in 5m rolls.

In Stock
Item Number:
DFP46
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1370mm wide

Select Length of Roll*
1370mm x 5m Roll (£111.30 ex VAT)
1370mm x 25m Roll (£500.85 ex VAT)
ASLAN DFP07 UltraTack

ASLAN DFP07 white gloss polymeric vinyl has an UltraTack adhesive specifically designed for use on low surface energy surfaces such as polypropylene. As well as for us onto apolar surfaces, the ultra high tack adhesive makes it perfect for long term signage and wall graphics. As the DFP07 has a high initial grab it is also suitable for use on galvanised steel and it offers the perfect solution for those jobs where a normal vinyl has a problem adhering adequately. Fire Rated to Euroclass DIN EN 13501-1:2018 with classification B-s1-d0. Available with clear or grey adhesive and in 10m rolls.

In Stock
Item Number:
DFP07
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1370mm wide

Select Length of Roll*
1370mm x 10m Roll (£80.60 ex VAT)
1370mm x 50m Roll (£362.70 ex VAT)

Colour Options

Choose Adhesive Colour Below*
DFP07 (Clear adhesive)
DFP07G (Grey adhesive)

Cut Sizes

Please enter cut sizes if required
Please mark clearly whether these sizes are in mm, cm or inches. Please leave blank you don't need this material cutting.
D-Jet 200 - Thick and easy to apply

This superb white gloss semi rigid vinyl has a very high tack permanent adhesive. It is ideal for use on flat surfaces and because of its thickness it is extremely easy to apply. The high tack adhesive bonds well to most substrates making this a popular choice for Health & Safety signage and POS. Roll size: 1400mm x 25m

£144.50 ex VAT
In Stock
Item Number:
DJ200
Your Price:
£144.50 ex VAT
Stock Info:
In Stock
Enter amount req:
Ri-Jet 75 Hi-Grip

Ritrama Ri-Jet 75 Hi-Grip is a gloss white digital polymeric vinyl designed to have excellent adhesion on low energy surfaces. Perfect for use one the plastic fairings of Moto X and quad bikes etc. Also recommended as an exterior floor vinyl on to smooth concrete surfaces. Buy it by the roll. 1370mm x 50m

£314.00 ex VAT
In Stock
Item Number:
RJ75HG1370
Your Price:
£314.00 ex VAT
Stock Info:
In Stock
Enter amount req:

Cut Sizes

Please enter cut sizes if required
Please mark clearly whether these sizes are in mm, cm or inches. Please leave blank you don't need this material cutting.
ASLAN DFP08 UltraTack Matt

ASLAN DFP08 white matt polymeric vinyl has an UltraTack adhesive specifically designed for use as a wall covering (grey adhesive version is similar to Mactac WW300) or on low surface energy surfaces such as polypropylene. As well as for use onto apolar surfaces, the ultra high tack adhesive and high initial grab also makes it suitable for use on galvanised steel and it offers the perfect solution for those jobs where a normal vinyl has a problem adhering adequately. Fire Rated to Euroclass DIN EN 13501-1:2018 with classification B-s1-d0. Available in 10m rolls.

In Stock
Item Number:
DFP08
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1370mm wide

Select Length of Roll*
1370mm x 10m Roll (£80.60 ex VAT)
1370mm x 50m Roll (£362.70 ex VAT)

Colour Options

Choose Adhesive Colour Below*
DFP08 (Clear adhesive)
DFP08G (Grey adhesive)

Cut Sizes

Please enter cut sizes if required
Please mark clearly whether these sizes are in mm, cm or inches. Please leave blank you don't need this material cutting.
ASLAN DFP06 UltraTack Transparent

ASLAN DFP06 Transparent polymeric vinyl has an UltraTack adhesive specifically designed for use on low surface energy surfaces such as polypropylene. As well as for us onto apolar surfaces, the ultra high tack adhesive and high initial grab also makes it suitable for use on galvanised steel and it offers the perfect solution for those jobs where a normal vinyl has a problem adhering adequately. Fire Rated to Euroclass DIN EN 13501-1:2018 with classification B-s1-d0. Available in 10m rolls.

In Stock
Item Number:
DFP06
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1370mm wide

Select Length of Roll*
1370mm x 10m Roll (£80.60 ex VAT)
1370mm x 50m Roll (£362.70 ex VAT)

Cut Sizes

Please enter cut sizes if required
Please mark clearly whether these sizes are in mm, cm or inches. Please leave blank you don't need this material cutting.
ATP GP412 :: Monomeric High Tack Vinyl 1370mm x 50m

High Tack Digital Print Vinyl for bonding onto difficult substrates and for applying in low temperatures. ATP GP412 is a Gloss white monomeric 2 year vinyl (80 micron) with a grey high tack adhesive for indoor and outdoor use onto most surfaces including apolar plastics, wood, metal and brickwork. Compatible with eco solvent, solvent, UV and latex digital printers. Available in White Gloss only.

£203.94 ex VAT
In Stock
Item Number:
ATP-GP412
Your Price:
£203.94 ex VAT
Stock Info:
In Stock
Enter amount req:
ASLAN DFP05 Monster Tack

ASLAN DFP05 Monster Tack is a white gloss polymeric vinyl with an amazing new adhesive formula, which is highly resistant to solvent vapours and lubricating oils. Perfect for use on really difficult surfaces such as construction and agricultural vehicles, plywood, and powder coated surfaces as well as items that are likely to be contaminated with oils such as petrol pumps etc. DFP05 Monster Tack can also be applied in temperatures as low as -10. Fire Rated to Euroclass DIN EN 13501-1:2018 with classification B-s1-d0. Available in 10m rolls.

In Stock
Item Number:
DFP05
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1220mm wide

Select Length of Roll*
1220mm x 10m Roll (£104.60 ex VAT)
1220mm x 50m Roll (£496.85 ex VAT)

Cut Sizes

Please enter cut sizes if required
Please mark clearly whether these sizes are in mm, cm or inches. Please leave blank you don't need this material cutting.
ASLAN DFP45 Gloss White Wall Wrap Vinyl

The digital printing film for outdoor walls turns every facade into an effective advertising space. A special adhesive system ensures that the ASLAN DFP 45 can be applied on every rough wall. For an application time of up to 6 months it can be removed easily in one piece without leaving residues. If applied with heat on the entire surface it has an outdoor durability of up to 3 years. Available in 5m rolls.

In Stock
Item Number:
DFP45
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1370mm wide

Select Size & Quantity of Rolls*
1370mm x 5m Roll (£102.90 ex VAT)
1370mm x 25m Roll (£463.05 ex VAT)
ASLAN DFP55 Matt White Wall Wrap Vinyl

The digital printing film for outdoor walls turns every facade into an effective advertising space. A special adhesive system ensures that the ASLAN DFP55 can be applied on every rough wall. For an application time of up to 6 months it can be removed easily in one piece without leaving residues. If applied with heat on the entire surface it has an outdoor durability of up to 3 years. Available in 5m rolls.

In Stock
Item Number:
DFP55
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1370mm wide

Select Size & Quantity of Rolls*
1370mm x 5m Roll (£102.90 ex VAT)
1370mm x 25m Roll (£463.05 ex VAT)
ASLAN DFP65 Transparent Wall Wrap Vinyl

The digital printing film for outdoor walls turns every facade into an effective advertising space. A special adhesive system ensures that the ASLAN DFP 65 can be applied on every rough wall. For an application time of up to 6 months it can be removed easily in one piece without leaving residues. If applied with heat on the entire surface it has an outdoor durability of up to 3 years. Available in 5m rolls.

In Stock
Item Number:
DFP65
Stock Info:
In Stock
Enter amount req:

Prices are per roll at 1370mm wide

Select Size & Quantity of Rolls*
1370mm x 5m Roll (£102.90 ex VAT)
1370mm x 25m Roll (£463.05 ex VAT)
FREE standard delivery on this roll. You can also upgrade to Pre-Midday or Pre-10AM delivery at the checkout.

Call us on 01858 431642 , we're always happy to help!

Next Day Delivery

ShopNav

Sign up to our newsletter

Keep up to date with everything new at Dorotape and find fresh inspiration for adding the WOW factor to your project. Plus product news, industry views and great offers too!

Company Address

This is where you'll find us

New Mill
Farndon Road
Market Harborough
LE16 9NP

///exclusive.blues.farm

© 2024 dorotape, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.059104 Seconds Memory Usage: 2.174255 Megabytes
Kryptronic