Application and Washing Instructions :: D Print Laser Light

Application temperatures and heat pressing times are only a guide and can vary depending on material content.  

It is therefore recommended that you do an evaluation on test material first.

Application and Washing Instructions:

• Print design in mirrored format onto the coated side from the bypass tray / multi feed tray
• Reduce toner levels by aprox 10% - 20%
• Trim away any unprinted paper around the image using scissors or scalpel
• Position image onto garment printed side face down
• Press according to the material selected (see table above)
• Peel backing paper away slowly while still warm.

It is recommended that the garment is turned inside out before washing.

DO NOT iron directly over the decal. Turn the garment inside out and iron from the back or cover with a silicon sheet.