Application temperatures and heat pressing times are only a
guide and can vary depending on material content.
It is therefore recommended that you do an evaluation on test
material first.
Application and Washing Instructions:
Plotting
/ Cutting
Plotter Blade Type
Cutting Pressure
Standard vinyl blade
Medium
Heat Pressing
Temperature
Press Time
Pressure
Peel
140oC - 160oC
10-12 secs
High
Cool
Application:
Prepare design and cut in mirror
Select medium speed on plotter depending on type and make
Use recommended plotter blade and adjust the offset
accordingly
Set heat press to 140oC - 160oC
Set press pressure to high
To eliminate creasing, lay down garment onto base platen
and press for 3-5 seconds
Open press and place the cut and weeded design at correct
location on the garment (polyester liner up)
We recommend at this point to cover the design with a sheet
of Tygaflor or a silicon sheet
Press for 10-12 seconds.
For garments with a high synthetic content, lower the heat
press temperature and pressure, whilst extending the press time
Open Press and remove garment. Remove polyester liner after
3-5 seconds while still hot unless you have applied colour on colour in
which case allow to cool slightly.
Aftercare:
It is recommended that the garment is turned inside out before
washing.
Washing
Temperature
Spin
Tumble Dry
Dry Clean
Up to 80oC
Yes
No
No
Ironing:
DO NOT iron directly over the decal. Turn
the garment inside out and iron from the back.
Use the form below to email a friend about this product.
All required fields are marked with a star (*). Click the 'Submit' button at the bottom of this form to proceed.
Login to enhance your shopping experience
