Application and Washing Instructions :: Printa-flock

Application temperatures and heat pressing times are only a guide and can vary depending on material content.  

It is therefore recommended that you do an evaluation on test material first.

Application and Washing Instructions:

• Print design in regular format (not mirrored).  
• Please note that we recommend that this material is used in the style of a badge and not cut into individual letters
• Select medium speed on plotter depending on type and make
• Use a cutting plotter blade designed to cut flocked material and adjust the offset accordingly and cut the outlines
• Weed the unprinted areas away leaving the printed design in place
• Set heat press to 160^oC - 170^oC
• Set press pressure to an optimum pressure for the garment selected
• To eliminate creasing lay down garment onto base platen and press for 3-5 seconds
• Open press and locate the logo onto the garment
• We recommend at this point to cover the design with a sheet of Tygaflor or a silicon sheet
• Press according to material selected (see table above) 
• Open Press and remove garment

It is recommended that the garment is turned inside out before washing.

DO NOT iron directly over the decal. Turn the garment inside out and iron from the back.