Application and Washing Instructions :: Image Flex Pro Sub Block 4010
Image Flex White appins
Application temperatures and
heat pressing times are only a
guide and can vary depending on material content.
It is therefore recommended
that you do an evaluation on test
material first.
RECOMMENDED
FOR USE WITH COLOURED POLYESTER SPORTSWEAR GARMENTS
This film is designed to be
digitally printed using solvent & eco-solvent inkjet printers
and contour cut systems. It is important to
keep the material clean and handle with care by the edges only.
Application:
> Leave print
to dry for at least 12 hours
> Weed away the excess material
> Cover image with TransPrint transfer film
> Remove backing liner of Image Flex
> Place image onto garment with Transprint
facing up
> Set press to a medium pressure
> Press at 135oC
for 17 - 20 seconds
> Remove TransPrint when cold
> Do not wash for 24 hours after application
> Wash inside out at 40oC
maximum
> Do not tumble dry or dry clean
All technical information and recommendations are based on tests we
believe are reliable.
However, we cannot guarantee performance under conditions not under
manufacturers control.
Before using, please determine suitability of the product for its
intended use.
Do your own wash test.
Warranty of product is to replace product only and not the garment the
transfer has been applied to.
Login to enhance your shopping experience
