Application and Washing Instructions :: Pro-flock

Application temperatures and heat pressing times are only a guide and can vary depending on material content.  

It is therefore recommended that you do an evaluation on test material first.

Application and Washing Instructions:

• Prepare design and cut in mirror
• Select medium speed on plotter depending on type and make
• Use a plotter blade designed for cutting flock materials and adjust the offset accordingly
• Set heat press to 170^oC 
• Set press pressure to medium
• To eliminate creasing, lay down garment onto base platen and press for 3-5 seconds
• Open press and place the cut and weeded design at correct location on the garment (polyester liner up)
• We recommend at this point to cover the design with a sheet of Tygaflor or a silicon sheet
• Press for 15-20 seconds. 
• For garments with a high synthetic content, lower the heat press temperature and pressure, whilst extending the press time
• Open Press and remove garment. Remove polyester liner when cool after 10 + seconds

It is recommended that the garment is turned inside out before washing.

DO NOT iron directly over the decal. Turn the garment inside out and iron from the back.