|
Application and Washing Instructions :: D Print Laser Light
Pro-flex appins
Application temperatures and
heat pressing times are only a
guide and can vary depending on material content.
It is therefore recommended
that you do an evaluation on test
material first.
Application
and Washing Instructions:
| Cotton |
185oC |
25
secs |
Heavy |
Warm |
| Polycotton |
185oC |
25
secs |
Heavy |
Warm |
| Polyester |
185oC |
25
secs |
Heavy |
Warm |
Application:
- Print design in
mirrored format onto the coated side from the bypass
tray / multi feed tray
- Reduce toner levels by aprox
10% - 20%
- Trim away any unprinted
paper around the image using scissors or scalpel
- Position image onto garment
printed side face down
- Press according
to the material selected (see table above)
- Peel backing paper away
slowly while still warm.
Aftercare:
It is recommended that the
garment is turned inside out before
washing.
Ironing:
DO
NOT iron directly over the
decal. Turn
the garment inside out and iron from the back or cover with a silicon
sheet.
|
|
Use the form below to email a friend about this product.
Required fields are marked with a star (*). Click the 'Submit' button at the bottom of this form to proceed.
Login to enhance your shopping experience
